Views:5 Author:Site Editor Publish Time: 2018-07-25 Origin:Site
1. Hydraulic pipe bender is suitable for bending the mortgage fluid conveying welded pipe under cold conditions, electric welded steel pipe, also suitable for bending other steel pipes of the same specification outer diameter.
2. It is applicable to general water pipes, conduits, thick steel pipes, etc., its angle of bending is up to 90 degrees.
3. The height of the grinding tool can be adjusted according to the curvature of the long tube.
4. The material is thick plate, which has higher strength and hardness, longer service life, smooth surface and less deformation.
1. When moving the floor jack, adjust the grip to 45°, and the staff can push and pull the jack.2. When the working position is aligned, adjust the grip to the horizontal direction, and adjust the position of the jack from front to back.3. Hold the squeegee lever handle and adjust the grip angle.4.