50 Ton Shop Press by air and hydraulic operated
Used for parts straightening,bending and pressing
Open side heavy duty construction allow work on the longest work pieces.
Remove and install bearings, gears, U-joints, bushings, ball joints, pulleys
Raise and lower table for the best working distance possible
Paint Color: Optional
Packing: strong plywood box
Sales Model: Wholesale
Air Hydraulic 50 Ton Shop Press is suitable for straightening work such as straightening of crankshafts and connecting rods, presses fiting, and is suitable for die press and punch press processing as well.
The 50 ton shop press's adjustable bed height with 2 pressure plates and support rods is used to install or remove gears, bushings or bearings, and is very suitable for straightening, pressing, bending or punching.
The best working distance can be achieved by raising and lowering the workbench.
Air and hydraulic
1. When moving the floor jack, adjust the grip to 45°, and the staff can push and pull the jack.2. When the working position is aligned, adjust the grip to the horizontal direction, and adjust the position of the jack from front to back.3. Hold the squeegee lever handle and adjust the grip angle.4.